Bookmark and Share

Home > Welded Wire Mesh Welding Process

Welded Wire Mesh Welding Process

Welded wire mesh welding technology process

A , welded wire mesh

1, the weft wire first through the straightening machine, straightening, placed on wire feed machine, pay attention to on both sides. Wire through the line board.

2, according to the size of the wire and mesh, adjust transformer gear (1-8), and adjust the heat gear. (see table 1)

3, adjust the eccentric distance, adjust the pull rod length to the appropriate location. Adjust the contact pressure.

4. Start the ignition switch, start the motor, slowly start speed table, begin to weld mesh.

Second, wire welding process

1, used equipment, spot welding machine

2, operation steps,

(1) starting power, each button to start the machine, the machine enter into the state of preparation.

(2) will wear silk (silk) into the spot welding net machine mold.

(3) to start the machine, make it into work state, welded wire mesh machine will be determined according to the spot weld wire (weft), in turn, good size on the warp.

(4) spot welding net table to regulate the flow of mechanical and electrical

Third, welded wire mesh welding process

1, the weft wire through straightening, first on the left wire hopper, at the same time will be via wire straightening, placed on wire feed machine.

2, according to the size of the steel bar diameter, mesh size, adjust the welding current size, time, and speed. (see table 3)

3, adjust the eccentric distance, adjust the pull rod length to the appropriate location.

4. Start the ignition switch, start the motor, slowly start speed table, begin to weld mesh.

www.erichardwarefilter.com